🎧 TOEIC 核心單字 — 第 9 頁:品質與創新篇

⬅ 第 8 頁  |  第 9 / 10 頁  |  第 10 頁 ➡

# 單字 音標 IPA 中文 例句 review
81
Durability n./ˌdʒʊə.rəˈbɪl.ə.ti/ 耐久度 The SSD's durability was verified through 10,000 write-erase cycles.
SSD 的耐久度通過了 10,000 次寫入-抹除循環的驗證。
82
Stability n./stəˈbɪl.ə.ti/ 穩定性 Long-term stability testing ran continuously for 30 days without any failure.
長期穩定性測試連續運行了 30 天,沒有出現任何故障。
83
Innovation n./ˌɪn.əˈveɪ.ʃən/ 創新 The company's innovation in 3D NAND led to significantly higher storage density.
公司在 3D NAND 方面的創新顯著提高了儲存密度。
84
Complexity n./kəmˈplek.sə.ti/ 複雜度 (O(n) 概念) The complexity of the validation process increases with each new product generation.
隨著每一代新產品,驗證流程的複雜度不斷提升。
85
Maintenance n./ˈmeɪn.tə.nəns/ 維護 Scheduled maintenance of test equipment prevents unexpected production downtime.
測試設備的定期維護可防止意外的生產停工。
86
Procedure n./prəˈsiː.dʒər/ 程序/步驟 Always follow the ESD handling procedure when working with bare flash chips.
在處理裸晶快閃記憶體時,請務必遵循靜電防護操作程序。
87
Recommendation n./ˌrek.ə.menˈdeɪ.ʃən/ 推薦/建議 The engineer's recommendation was to increase the over-provisioning ratio to 28%.
工程師建議將過度供應比例提高至 28%。
88
Perspective n./pəˈspek.tɪv/ 觀點/洞察 From a long-term reliability perspective, adding redundancy is well worth the cost.
從長期可靠性的角度來看,增加冗餘是非常值得的投入。
89
Objective n./əbˈdʒek.tɪv/ 目標 (Project Goal) The main objective of this stress test is to measure endurance at high temperature.
此壓力測試的主要目標是測量高溫下的耐久度。
90
Outcome n./ˈaʊt.kʌm/ 結果/產出 The outcome of the 30-day stress test confirmed the device is production-ready.
30 天壓力測試的結果確認了裝置已達量產標準。

⬅ 第 8 頁  |  第 9 / 10 頁  |  第 10 頁 ➡

🧠 記憶圖 / 筆記

品質與創新篇 記憶示意圖


📝 例句練習

  1. The SSD’s durability was verified through 10,000 write-erase cycles.

    SSD 的耐久度通過了 10,000 次寫入-抹除循環的驗證。

  2. Long-term stability testing ran continuously for 30 days without any failure.

    長期穩定性測試連續運行了 30 天,沒有出現任何故障。

  3. The company’s innovation in 3D NAND led to significantly higher storage density.

    公司在 3D NAND 方面的創新顯著提高了儲存密度。

  4. The complexity of the validation process increases with each new product generation.

    隨著每一代新產品,驗證流程的複雜度不斷提升。

  5. Scheduled maintenance of test equipment prevents unexpected production downtime.

    測試設備的定期維護可防止意外的生產停工。

  6. Always follow the ESD handling procedure when working with bare flash chips.

    在處理裸晶快閃記憶體時,請務必遵循靜電防護操作程序。

  7. The engineer’s recommendation was to increase the over-provisioning ratio to 28%.

    工程師建議將過度供應比例提高至 28%。

  8. From a long-term reliability perspective, adding redundancy is well worth the cost.

    從長期可靠性的角度來看,增加冗餘是非常值得的投入。

  9. The main objective of this stress test is to measure endurance at high temperature.

    此壓力測試的主要目標是測量高溫下的耐久度。

  10. The outcome of the 30-day stress test confirmed the device is production-ready.

    30 天壓力測試的結果確認了裝置已達量產標準。